All Weather Molded One-Piece Fiberglass Composite Buildings
ALL WEATHER MOLDED ONE-PIECE FIBERGLASS COMPOSITE BUILDINGS
High quality fiberglass composite buildings designed for all-weather, year-round protection of your equipment and/or instrumentation.
Corrosion resistant materials of construction for long life.
Molded one-piece construction for high strength and low cost.
Virtually maintenance free.
Insulated to reduce heating/cooling costs.
Light weight for easy installation.
Numerous sizes and optional equipment items are available to meet your requirements.
Fast delivery on many sizes.
APPLICATIONS
STANDARD FEATURES/EQUIPMENT
All-weather, molded one-piece fiberglass reinforced polyester buildings are well suited to house and protect equipment for a wide variety of applications such as:
Peaked roof with two (2) cadmium plated lifting eyes.
Single door (for models #EFC-72x___ -1 and
EFC-54x___-1), insulated composite construction, flush-fitting, 36" wide x 78" high (O.I.C.) - see door construction/hardware.
composite construction, flush-fitting, 63" wide x 78" high
Pollution monitoring equipment
Electronic and communications equipment
(O.I.C.) - see door construction/hardware.
Marine and fire fighting equipment
White color molded-in (painting not required). Insulated with 1" thick, class 1, flame resistant, rigid foam. Internal 4" wide x 1/4" thick, integral fiberglass base mounting
Pumps, motors and generators
Safety showers
flange, predrilled for 1/2" diameter anchor bolts.
CONSTRUCTION
Closed cell neoprene rubber base mounting gasket. Designed to withstand 120 MPH wind load and 30 PSF roof load.
All-weather, molded one-piece fiberglass reinforced polyester buildings are fabricated of composite construction consisting of:
Smooth white isophthalic gelcoat finish containing U.V. inhibitors on exterior surface.
DOOR CONSTRUCTION/HARDWARE
Door is fabricated of molded one-piece composite construction (similar to walls and roof) with 1 1/2" thick, class 1, flame resistant foam insulation.
Minimum 1/8" thick fiberglass reinforced polyester laminate (minimum 30% glass content by weight) on exterior surface.
Standard single door (for models #EFC-72x___-1 and EFC-54x___-1) is 36" wide x 78" high (O.I.C.).
1" thick, class 1, flame resistant, rigid foam insulation, closed cell type, 2.0#/cu. ft. density, having a K-factor of .14 BTU•in/hrft °F and an R-value of 7.1.
Standard set of double doors (for models #EFC-72x___-2 are 63" wide x 78" high (O.I.C.).
Minimum 1/16" thick, fiberglass reinforced polyester laminate (minimum 30% glass content by weight) on interior surface.
Door frame is integrally molded within front wall.
Door hardware consists of:
Continuous stainless steel piano hinge
White isophthalic gelcoat finish on interior surface.
Plated safety stop (crash) chain
CHARACTERISTICS
Stainless steel cylindrical lockset
Plated chain and cane bolts (for model #EFC-72x___-2)
All-weather, molded one-piece fiberglass reinforced polyester buildings have the following characteristics:
Neoprene sponge rubber gasket (weather-stripping)
Insulated composite construction
Economical
Neoprene rubber base wiper gasket
Corrosion resistant
Rugged
Non-corrosive fasteners
UV resistant
Light weight
Virtually maintenance free
Easy installation
LEGEND
A. Exterior FRP laminate with gelcoat finish, min. 1/8" thick.
E. Neoprene sponge rubber gasket (weather-stripping).
F. Continuous stainless steel piano hinge.
B. 1" thick polyisocyanurate foam insulation in walls & ceiling.
G. Plated cane bolt for passive door.
H. Astragal (Z-bar style) for passive door.
C. Interior FRP laminate with gelcoat finish, min. 1/16" thick.
D. Integral FRP door frame.
LEGEND
1. Cadmium plated lifting eye - two (2) provided
5. Stainless steel cylindrical lockset.
2. Plated safety stop chain.
6. Plated cane bolt for passive door.
3. Plated chain bolt for passive door.
7 Neoprene rubber base wiper gasket.
4. Continuous stainless steel piano hinge.
LEGEND
A. Exterior FRP laminate with gelcoat finish, min. 1/8" thick.
B. 1" thick polyisocyanurate foam insulation in walls & ceiling.
C. Interior FRP laminate with gelcoat finish, min.1/16" thick.
D. 4" wide x 1/4" thick integral FRP base mounting flange.
E. 9/16" diameter predrilled hole for anchor bolt.
ORDERING INFORMATION
When ordering please provide the following information:
Model # and size of building.
Color of building.
Door swing (for models #EFC-72x___-1 and EFC-54x___-1).
Active/passive door position (for model #EFC-72x___-2).
