MOVE & PLACE DRUMS ALMOST ANYWHERE AUTOMATIC GRAB & HOLD-OPEN CYCLE
MODEL 90 VERTI-KARRIER
This unit automatically grabs and releases a closed steel drum, and picks or places drum on a pallet. This advanced lifter is based on the original Morse patent. Attach the Verti-Karrier to your hoist, move the karrier to the drum, and then lift. It grips automatically and releases its hold only when the drum is put down. The operator only needs to guide the grab into position. Handle closed standard steel 55-gallon (210 liter) drum, tight-head or removable top with lid clamped on.
Capacity: 1,000 Lb. (454 kg).
MODEL 90-SS is made of type 304 stainless steel MODEL 90-85 for 85-gallon steel salvage drum
MODEL 90-SS
90 SERIES OPERATION
1. Attach Drum Lifter to your hoist and move to the drum. Automatic latch keeps the grippers open until it settles on top of the drum. 2. The open grippers and cross plates help it settle and stand in place on drum. Latch automatically shifts so Drum Lifter will grip drum during lift. 3. Raise hoist to close the grippers and lift the drum. Grippers press equally on both sides of the drum. 4. Drum Lifter tightly grips drum until weight is fully down. Then it releases the deposited drum and remains open to repeat the lifting cycle.
MODEL 91 LIFTER FOR DRUM OR OVERPACK
Morse invented this lifter for placing a steel 55-gallon (208 liter) drum into an overpack or salvage drum. It can also be used to move a steel overpack drum. What makes this lifter effective and simple to use is its carefully designed ice-tong-like geometry and broad faced, thin profile grippers. The broadness of the grippers spreads the holding force to minimize pressure on the drum. The narrow profile enables it to lower the drum completely into the overpack. The Model 91 can also be used to lift and move a closed steel salvage drum. Model 91 is load tested and factory certified at 125% of rated capacity as per American National Standard ASME B30.20.
Handle: 55-gallon steel drum into overpack. 85-gallon (325 liter) steel overpack. Capacity: 1,000 Lb. (454 kg)
92 SERIES DRUM LIFTERS
LIFTS A RANGE OF SIZES AND TYPES! PUT DRUMS INTO OVERPACK
MODEL 92 DRUM LIFTER
Self adjusting tong-like action automatically grips various common types of closed drums. Slim-profile grippers allow you to lower a drum into over- packs... place 30's into 55's, or 55's into 85's. Note: Rim must be within 1" of the top of drum to be lifted. Drum lid must be properly secured. Do not exceed drum manufacturer's packing limit. Each unit is load tested at the factory at 125% of rated capacity as per American National Standard ASME B30.20, and a load test certificate is supplied. Handle steel, fiber or plastic drum with 18" to 26" (45.7 to 66 cm) inside diameter, including 30, 55 and 85-gallon steel drum, leverlock fiber drum, & rimmed plastic drum. Capacity: 1,000 Lb. (454 kg).
Model 92 Drum Lifter for 55-gallon steel, fiber or plastic drum.
MODEL 92 is made of carbon steel
MODEL 92-SS is made of type 304 stainless steel.
MODEL 92-30 handles drum with 15" to 23" (38.1 to 58.4 cm) diameter.
MODEL 92-5 is sized for a 5-gallon pail with 11" to 15" diameter, and has 300 Lb. capacity.
NOTE: Bottom of the drum rim must be within 1" of the top of the drum. Weight of drum contents must not exceed drum manufacturer's packing limit. Drum lid must be properly secured.
Guide the drum lifter into position on the drum top. Then the self-adjusting tong-like action works to lift a rimmed steel, plastic or fiber drum.
Model 92 drum lifter shown lifting a 55-gallon plastic drum
Drum lifter model 92-SS is made of type 304 stainless steel.
Model 92-30 drum lifter is used for a 30-gallon rimmed steel, fiber or plastic drum.
Order Online
Click the button of the item you wish to purchase.
MOVE & PLACE DRUMS ALMOST ANYWHERE
