The FS Industries 017S3674-P-C is a prefab structural steel stairway that meets OSHA 1910.25. It fits a 72"-77" floor to floor height, with a 64 9/16"-68 7/8" horizontal run at a nominal 45 degree angle. Its 36" wide diamond plate treads are 9 1/2" deep with open risers, for a 39" overall width.
The frame is polyester powder coated in gray, black, blue, white or safety yellow, with diamond plate treads to match. It has 36" inboard handrails and 42" guardrails.
Specify the actual floor to floor height when ordering. Please note: a drawing will be emailed to you for your approval prior to fabrication.
IBC Industrial - Internal Handrail 42" guards 36" inboard rails 32° comfort angle, conforms to IBC groups F, H, I, S for industrial/commercial uses to 144"
45 Degree Stair 36" handrail/guard 45° incline Acceptable for all uses up to 48" or for heights to 144" for non-routine travel between levels
32 Degree Stair 36" handrail/guard 32° comfort incline Accceptable for all uses up to 48" or heights to 144" for non-routine travel between levels
IBC stair for all use groups 36" inboard handrails, 42" balusters guards 32° comfort angle, conforms to new OSHA 2017 standard For all stair applications to 144"
45 Degree Aluminum Stairs 36" handrail/guard 45° incline Acceptable for all uses up to 48" or for heights to 144" for non-routine travel between levels
32 Degree Aluminum Stairway 7/11 Rise-Run 36" handrail/guard 32° comfort incline Accceptable for all uses up to 48" or heights to 144" for non-routine travel between levels
