Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Index Order Search Quote Info About Us Services
    Categories
Back to Product Category
BACKSAVER LITE PORTABLE PRODUCT LINE
Backsaver Portable Lift Tables are packed with all the same features as our stationary lifts. Low pressure hydraulics Fast
raising and lowering Fully adjustable down speed Heavy-duty torque tubes to minimize deflection Lubricated for life pins,
rollers and bushings Full width straight through axles for increased stability throughout the travel range Heavy-duty wire
braided hoses for maximum burst strength Tell-tale return hydraulic line prevents fluid spillage Built-in maintenance chocks
Bolt-on power unit is neat, clean and allows for easy access to all components
Low pressure hydraulics
Fast raising and lowering
Fully adjustable down speed
Heavy-duty torque tubes to minimize deflection
Lubricated for life pins, rollers and bushings
Full width straight through axles for increased stability
    throughout the travel range
Heavy-duty wire braided hoses for maximum burst strength
Telltale return hydraulic line prevents fluid spillage
Built-in maintenance chocks
Bolt-on power unit is neat, clean and allows for easy access
    to all components
MODEL CAPACITY
(LBS)		 VERTICAL
TRAVEL		 LOWERED
HEIGHT		 STANDARD
PLATFORM		 MAXIMUM
PLATFORM		 VOLTAGE WEIGHT
(LBS)**		 BASE PRICE
MINIMUM TOP		 ANY
OVERSIZED TOP
CLL05.5-26 550 26" 10 1/2" 24" X 40" 30" X 48" 12V DC 315 $2,252 $2,440
CLL1.1-26 1100 26" 10 1/2" 24" X 40" 30" X 48" 12V DC 325 $2,371 $2,559
PLATFORM OPTIONS:
Bellows Accordion Skirting
Vinyl black and yellow 3" pleats. Requires minimum of 8" oversize platform for mounting.
Encloses base and leg assembly. (Not available in portable lite lifts)....................................................$661.20 (installed)
POWER UNITS/HYDRAULIC OPTIONS:
External Mount of any standard internal power unit, includes five feet of hydraulic hose and return
line...................................................................................................................................................$125.40
Air Power Unit and Controls
1.0 gpm at 80 psi and 80 cfm free air, with lift fully loaded, hand or foot valve control included.
5 feet of hose included. Filter, regulator and lubricator not included...........................................Add $1,014.60
(External mount; for stationary units only.)
No Controls with air motor ............................................................................................................No Deduct
 Note: Machines with air motor and controls meet requirements for NEMA 7, 8, & 9 for explosion proof.
ELECTRICAL OPTIONS:
Upper Travel Limitswitch
 Mounted and wired: NEMA 4 ...........................................................................................................$199.50
(Not available mounted internally for 05.5-26 or 1.1-26 models, consult us.)
Lower Limitswitch
 Mounted and wired, to be used as a signal only, NEMA 4 or 12..........................................................$199.50
(Not available mounted internally for 05.5-26 or 1.1-26 models, consult us.)
PORTABILITY OPTIONS:
All portability options are to be used with the lift platform in the low position only.
Backsaver Lite Portable, Bellows Accordion Skirting, Electric Lift Table, Hydraulic Lift Table, Hydraulic Scissor Lifts, Lift Table, Lift
Tables, Pneumatic Lift Tables, Portable Lift Table, Powered Lift Tables, Southworth Lift Table, Tilt Tables, and Tilters from your source
for material handling equipment.

Back to Product Category
Home - Product Index - Order - Search - Quote- Info - About Us - Services